Is existing bathtub plumbing set up okay for a remodel?
Existing bathtub plumbing has to be checked to see if the current layout can stay or needs to be updated when replacing a tub or switching to a walk-in shower. Even with a new p-trap and a long sweep 90-degree fitting, the wrong angle can cause drainage issues. Without knowing whether the existing setup is okay, homeowners are left guessing whether to keep it or change it.
Core Friction Pattern
Analysis of 2 peer accounts across online developer and community forums reveals that “Is existing bathtub plumbing set up okay for a remodel?” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
+4 alternative community-tested workarounds cataloged below.
What the numbers show
Counted from the threads quoted below. How we count
- People have been saying this in most months since September 2026.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
Is existing bathtub plumbing set up okay for a remodel?
- 1Replacing the setup completelyDid this help you?
- 2Modifying the trap and removing unnecessary 45-degree fittingsDid this help you?
- 3Cut more out of the subfloor to fit a 45-degree bend insteadDid this help you?
- 4Connect directly off the P-trap with no extra fitting if alignment allowsDid this help you?
- 5Keep the drain run after the P-trap straight and within maximum unvented run limitsDid this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“I am replacing my bath tub in my bathroom and this is the plumbing under the tub in my basement. Is this set up okay, or should I update any of this?”source ↗
“Ripped out our tub to install a walk in shower. I’ve removed the shower drain and got a long sweet 90 degree with a new p trap. Is this an okay angle for the p trap or will I have issues with drainage?”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
How to tell if a bathtub leak is the drain, gasket, or tub itself
Bathtub leaks can stem from multiple sources like a failing gasket, a drain assembly issue, or a crack in the tub material itself, making it difficult to pinpoint the exact failure. In remote locations where hiring a professional is prohibitively expensive, diagnosing the problem incorrectly can lead to unnecessary and costly repairs.
How hard is it to convert a walk-in shower back to a bathtub?
Converting a walk-in shower back to a bathtub requires a massive amount of labor, including tearing out the wet walls, subfloor, and surrounding flooring because matching existing tiles and grout is nearly impossible. This invasive process often uncovers hidden damage once walls are opened and forces homeowners into a much larger, more complex renovation than initially planned.
Why won't a new bathtub spout fit my existing pipe?
Different replacement tub spouts use incompatible connection methods, such as slip-on versus threaded connections or mismatched pipe stub lengths, which leaves gaps against the wall. Because of these variations, a new spout often cannot be installed without buying the exact matching model or modifying the plumbing configuration.
Why is my bathtub overflow leaking behind the wall?
The angled overflow gasket is likely resting incorrectly against the tub. When this seal is misaligned or wearing away, water leaks behind the wall whenever the tub is filled close to the cover, creating a serious risk for hidden mold.
How to add a bidet sprayer to a bathtub faucet
Connecting a handheld bidet sprayer to a bathtub faucet requires routing around existing shower diverters and dealing with tight bathroom layouts. Standard bidet T-adapters do not fit standard tub spouts, leaving people stuck with leaks or forced to reconfigure the entire plumbing assembly behind the wall.
New bathtub still leaking after plumber replacement
A new bathtub can still leak behind the wall or into the ceiling after delays, redo work, and thousands spent because confidence in the plumber's work is gone. Homeowners get stuck not knowing whether to call the plumber back or repair it themselves without the budget for someone new or the knowledge to fix it. That leaves them unsure how to get the leak fixed without tearing out more tile or cutting drywall.