Where to buy actual removable pin door hinges
Manufacturers often sell hinges as removable pin when they aren't, making it nearly impossible to install heavy 80-pound doors by yourself. This lack of true removable pins forces people to struggle with holding heavy doors in place or abandon new hardware entirely in favor of painting old ones.
Core Friction Pattern
Analysis of 2 peer accounts across online developer and community forums reveals that “Where to buy actual removable pin door hinges” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
+3 alternative community-tested workarounds cataloged below.
What the numbers show
Counted from the threads quoted below. How we count
- People have been saying this in most months since September 2026.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
Where to buy actual removable pin door hinges
- 1Spray paint old hinges and use longer screwsDid this help you?
- 2replacing the frame and the doorDid this help you?
- 3learning how to hang a slab doorDid this help you?
- 4contacting contractorsDid this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“Annoying these hinges are here because there hasnt been a door here for over 30 years”source ↗
“I've bought several sets of hinges that are sold as "removable pin" and none of them are, when I get my hands on them.”source ↗
“I can't imagine holding one of these doors in place to put a hinge on, they each weigh like 80lbs”source ↗
“Where can I get hinges?? Or should I just spray paint the ones that were on there and put a longer screw in...because this is getting ridiculous.”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
How to remove a stuck fixture without breaking it
There are absolutely zero online directions for removing these fixtures, leaving people stalled when a ring is siliconed in and will not budge. While the fixtures ultimately release with quite a bit of force, people avoid hitting them because they do not want to crack the sink or ceiling.
Stuck differential cross pin bolt won't come out
The bolt head presses directly against the differential housing, leaving no room to slide out without risking snapping the end. High-torque tools like impact wrenches and 4-foot breaker bars fail to break it loose, often resulting in broken tools or the fear of shearing the bolt entirely.
How to remove a stripped recessed retaining screw
Standard methods like flathead screwdrivers, extractor bits, and wrenches often fail on recessed or stubborn fasteners when there is no room for power tools or welding. This prevents routine maintenance like changing brake rotors or dismantling wall fixtures.
How to remove trim panels without breaking hidden clips
Interior trim panels often rely on hidden fasteners and tight seals that leave no room to slide tools underneath without causing damage. Without knowing where these unseen attachments are located, trying to pry the panel off usually results in snapping the plastic or breaking the clips entirely.
Allen key stuck in swing arm axle
An Allen key can become completely jammed inside a vehicle's swing arm axle so that standard extraction methods like hammers, levers, and high-torque impact tools fail to free it. Because the bolt head is often inaccessible, the key cannot simply be cut off, leaving the axle wedged and preventing further disassembly.
Can't get bottom of strut over lower control arm
The bottom of the strut gets stuck and won't clear the lower control arm because the assembly lacks sufficient downward flex and clearance. Even after clamping the springs or fighting stubborn pinch bolts, you typically need to lift the vehicle nearly three feet in the air to achieve the extreme angle required to slip it free.