How do I check if the roofer covered my attic vents?
Homeowners worry that roofing contractors may have blocked attic vents during replacement, but many lack the physical ability or know-how to climb up and inspect the attic themselves. This leaves them unsure whether to demand proof from the contractor, hire an independent inspector, or just guess based on how hot the house feels.
Core Friction Pattern
Analysis of 2 peer accounts across online developer and community forums reveals that “How do I check if the roofer covered my attic vents?” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
+4 alternative community-tested workarounds cataloged below.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
How do I check if the roofer covered my attic vents?
- 1Calling a home inspector for a ventilation check.Did this help you?
- 2Hiring a different roofer to inspect the attic from the inside.Did this help you?
- 3Asking the original contractor to provide photos of the vents from inside the attic.Did this help you?
- 4Keeping attic windows open for temporary cross ventilationDid this help you?
- 5Waiting to handle ventilation and roofing work simultaneouslyDid this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“had our roof redone over the summer and I am worried that maybe they might have covered the vent in the attic, and I am not savvy as to how to check and am disabled to boot.”source ↗
“Do I assume he left the vent open or do I ask him to prove he did, or do I need to have someone inspect our attic?”source ↗
“It worries me. Who do I usually call for this or is the contractor responsible to show this to me?”source ↗
“Reading about it, just made me think. It did feel a bit HOT this summer, more than normal. So...”source ↗
“Our attic is pretty fucked in terms of ventilation.”source ↗
“So I am not sure if it would be smart to get the ventilation put in for free (either gable or powered fan) and not change it when we get a new roof, or just have the roofing contractor install a ridge vent when we do the new roof.”source ↗
“I just don't want to have the state contractor cut gable vents into our attic wall only to cover them up later on to do a ridge vent when we do a new roof”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
How to find a contractor who actually does attic ventilation calculations
Most roofers only want to slap down shingles and leave the same day instead of handling complex ventilation work or tricky setups like rubber roofs. This makes it nearly impossible to get proper calculations and installation done without hiring the wrong tradesman. Homeowners end up stuck trying to figure out which professional to call and how to get the job done right.
Are open cavity vent returns and exposed pipes normal in new construction?
Open-cavity plenum returns and exposed bathroom pipes are shortcut building methods used to save installation time and material costs. These makeshift setups compromise indoor air quality, create noise issues, and expose plumbing lines to potential damage inside the HVAC pathway.
Are powered attic roof vents actually worth it?
Powered roof fans and alternative vents can cause confusion because people aren't sure if they live up to the hype or might actually harm attic airflow. Without knowing how these options compare to traditional whirlybirds or whether mismatched intakes will ruin the balance, homeowners struggle to choose the best ventilation setup during a reroof.
Does a roof edge gap mean I need a new roof?
A gap along roof edges may be intentional spacing because shingles cannot flex there, but it can still look off and leave you wondering if a detached DIY roof needs replacing. Having to ask a roofer or guess what looks right makes it hard to know whether the roof is sound or needs a full replacement.
How to ventilate an attic with no open soffits?
Older houses often lack open soffits and inlet air, leaving attics with outlet vents but no way for fresh air to enter. This traps heat and humidity, causes the second story to run nonstop, and leads to ice damming during winter.
How to tell if a ridge vent was installed correctly
Roofers sometimes install ridge vents just for appearance without cutting the roof decking underneath, but standard visual checks or endoscope cameras can fail to confirm the cutout. Without knowing if the gap or missing shingle near the end is a defect or normal, homeowners are left guessing whether they need to pay for repairs.