What people keep running into with mold
Complaints tagged mold, each raised by more than one person. One-off posts are not included.
74 recurring problems · 765 people · 20 forums we read
Raised more than once
Most people first.
- 13How to get mechanic grease out of car interiorMechanic grease stains left behind after a service visit are notoriously stubborn to remove from fabric and leather car seats. Trying to clean them without the right solvent often leaves dark smudges or ruins the upholstery, preventing car owners from fully restoring their interior.
- 12How to get stubborn black mold off exterior brickStandard scrubbing and degreasers fail on deep-set exterior black marks because the growth embeds into the material rather than sitting on the surface. Trying to force it with hard-bristled brushes often strips the surrounding mortar instead of removing the stain, leaving homeowners stuck between ruining the masonry or resorting to painting over it.
- 12How to clean mold and gunk trapped inside washing machine rubber sealFront-load washing machine seals trap mold and slime in tight gaps between the rubber and the metal where fingers and scrub brushes cannot reach. This leaves stubborn buildup behind that standard scrubbing fails to remove, preventing a truly clean seal.
- 12Dealing with severe mold in a rental when management won't actLandlords and university administrations often dismiss tenant complaints about mold by telling them to simply open windows, leaving residents stuck in spaces with poor ventilation, motion-activated AC units, and hidden contamination behind filters. Without official recognition or action from management, tenants are blocked from making major repairs or renovations, forcing many to choose between ongoing health issues or moving out at their own expense.
- 11How to stop mold and bad smells in front loader washersFront loader washing machines trap standing water and lack adequate ventilation, turning sealed drums into mold and mildew factories when closed. This persistent moisture buildup creates unpleasant odors and forces people to keep doors open or abandon front loaders altogether.
- 11How to clean a reusable bottle with mold or sunscreen insideReusable bottles left unwashed for months or contaminated with substances like sunscreen can usually be salvaged with a deep soak using hot water, dish soap, and white vinegar or baking soda. If the odor or residue persists after scrubbing with a bottle brush, the material may be permanently compromised and should be replaced.
- 11How to clean mold and swampy smells off a garbage disposal rubber flapPersistent mold and swampy odors hide on the underside of the rubber garbage disposal splash guard where standard scrubbers cannot reach. This buildup survives routine liquid cleaners like bleach or vinegar, causing foul smells to return within a week whenever you use the sink.
- 11How to find and handle hidden mold behind wallsHidden mold behind drywall requires immediate verification and remediation, but sealed walls prevent you from accessing the opening to check the severity. Without knowing the next steps, homeowners panic about safety and air quality while trying to decide whether invasive repairs are truly necessary.
- 10Ceiling popping noises and drywall screws showing after roof repairFasteners popping out of the drywall and mysterious white or brown spots appearing after a roof installation point to underlying structural stress or moisture issues. These symptoms can make it difficult to determine whether the house is simply settling or if dangerous mold is developing.
- 9Is the black stuff in my air conditioner mold or dust?Internal AC buildup is often hard to distinguish between ordinary dust and mold, leaving people unsure whether the unit can be salvaged or must be thrown away. Discovering mold forces renters to contact landlords and prompts immediate concerns about health safety and unit replacement.
- 9Why is there condensation and damp spots on walls only on laundry days?Unvented indoor drying releases enough moisture to cause localized condensation and damp patches in specific rooms. This traps excess humidity against cold surfaces, preventing normal evaporation until the washing cycle stops and the space dries out over the next day.
- 9Mold on things from a storage unitStorage units often trap moisture that ruins stored belongings like fabric furniture and wooden frames with widespread mold growth. This leaves people overwhelmed by deciding what can be salvaged and terrified of bringing contaminated items back into their homes.
- 9Is this mold or a water leak, and do I need to call someone?Homeowners who spot mysterious discoloration near fixtures like faucets are left terrified of whether it's harmless condensation or a hidden pinhole leak. Because they cannot tell if the spot indicates dangerous mold or a pipe failure, they struggle to decide whether to immediately cut into drywall or call a professional.
- 9Why does a chimney keep leaking after multiple repairs?Water keeps leaking along the edge of the chimney during heavy storms despite being repaired multiple times by different contractors. This recurring issue leads to black mold returning years later and leaves homeowners wondering if the entire chimney needs to be replaced.
- 8Why are my metal floor vents sweating and growing mold?High humidity and unsealed gaps around metal floor registers allow moist crawlspace air to enter the home, causing the cold metal vents to sweat heavily and grow mold. This leaves homeowners dealing with unsightly black mold around the floor grates and white buildup inside the vents, which requires sealing the gaps to stop the airflow.
- 8How to get an old coffee stain off the ceilingStandard cleaning methods like magic erasers, soap, and heavy scrubbing fail on coffee stains that have set for months or up to a year. This leaves people stuck trying to figure out which specialized products or disassembly techniques are actually required to clean the area and prevent future stains.
- 8Black buildup around air vents: mold or dust?Dark buildup around vents is often a combination of mold and accumulated dust and dirt rather than just one or the other. Homeowners find themselves unsure of what the stains actually are, leaving them questioning whether they are dealing with mold or simply filthy vents.
- 8Why does mold keep growing back after I paint over it?Scraping and painting over mold does not stop it from returning because the underlying moisture issues remain. Poor ventilation in older homes causes walls to sweat during showers, trapping dampness even after the room is aired out. Without the money to fix the structural ventilation, people are trapped in a cycle of regrowth that leaves them feeling constantly sickly.
- 8Do I need to replace the whole faucet for a leak?Whether you can take apart and fix a leaking sink component depends on whether the parts are already too far gone. When water backs up a braided pipe or a garbage disposal starts leaking, it leaves you guessing whether a repair is possible or if you need to replace the entire assembly.
- 7Why does bathtub caulk keep cracking over and over?Bathtub caulk repeatedly cracks shortly after application, which traps mildew underneath and forces people to redo the job every few weeks. This endless cycle wastes time and money while failing to maintain a proper waterproof seal around the tub.
Comes up alongside
Topics that keep appearing on the same problems — not topics with similar names.