What people keep running into with surface preparation
Complaints tagged surface preparation, each raised by more than one person. One-off posts are not included.
8 recurring problems · 155 people · 9 forums we read
Raised more than once
Most people first.
- 46How to remove old dried adhesive before laying LVP flooringOld dried adhesive must be scraped away completely before laying a vapor barrier and LVP. Scraping old residue by hand is extremely tedious and can take hours per strip, which stops installers from easily prepping the subfloor.
- 34How to get old unknown stains out of a rental carpet cheapCarpet machines can push dirt deeper and make set-in stains worse, and replacing the carpet is completely out of a tight renter's budget. Using the wrong DIY fixes like standard cleaning methods or harsh chemicals can permanently lock in unknown spills, leaving you stuck with unsightly spots right before a lease ends.
- 30How to get dried mucus off painted walls without ruining the paintDried mucus binds tightly to wall paint, meaning standard scrubbing either takes forever or strips the paint off entirely. This leaves behind rough textures that ruin the wall finish and make it impossible to hang items or repaint smoothly without extensive patching.
- 28How to get oil stains out of concrete without a power washerStandard cleaning methods and power washing often fail to lift stubborn oil marks from concrete. This leaves homeowners stuck trying to find a cheap, effective alternative that actually breaks down the grease without needing expensive equipment.
- 6How to get dried paint off plastic pipesRemoving paint and textured residue from old plastic piping is necessary to prepare the surface for priming and solvent welding. Without a clean section of pipe, you cannot properly prime and glue the joints together.
- 5How to fix a botched self leveling compound job with dipsWhen self-leveling compound sets too quickly, it leaves behind unexpected high spots, thin coverage, and persistent dips in the subfloor. Fixing this botched application requires grinding down the high areas and pouring a fresh, properly mixed patch layer before you can safely install new flooring.
- 4Can you put wall filler straight over exposed joint compound?Exposing the underlying mud while scraping away old paint or caulk means you are dealing with a water-soluble surface. Applying a primer or sealer first prevents the moisture in the wall filler from dissolving the exposed mud, which stops the patch from bubbling, failing to adhere, or washing out.
- 2Will epoxy fill in rough spots and grinding marks?Epoxy does not completely fill in rough grinding spots or residual tool marks. These textures can stick out through the top of the finished coating, leaving an abrasive surface that feels like asphalt or coarse sandpaper. Because the floor constantly catches on microfiber washcloths, it becomes practically impossible to clean.
Comes up alongside
Topics that keep appearing on the same problems — not topics with similar names.